Services
Engineering, construction and maintenance across telecom, buildings, railways, roadways and solar, delivered with our own fleet and workforce.
Telecom
We build and maintain the infrastructure that mobile and broadband networks run on: fibre routes, tower sites and radio links.
Capabilities
- Fibre optic: OFC laying, testing and commissioning
- Horizontal directional drilling (HDD) crossings
- FTTH and FTTx rollout
- Cell tower installation
- Capacity addition and sector addition
- Small cell deployment
- ESC and GBM sites
- UBR and microwave (MW) installation and commissioning
- Operation and maintenance (O&M)
Typical deliverables
- Route survey, permissions support and as-built route drawings
- OTDR and link test reports for every fibre section
- Tower-site installation with acceptance test documents
- Preventive and corrective maintenance records
Datacenter
Datacenter work in the group is handled by our subsidiary Serververse, a cloud infrastructure company that runs its own network.
Delivered by Serververse
AR Solution's data infrastructure work is carried out by its subsidiary Serververse, which owns and operates serververs.com and serververse.in and Autonomous System Number (ASN) 218984, providing network infrastructure, IP transit, peering, and BGP routing.
Capabilities
- Datacenter building: civil works
- Electrical systems
- Cooling
- Rack fit-out
- Physical security
- Network infrastructure
- IP transit
- Peering and BGP routing
Typical deliverables
- Datacenter rooms handed over ready for equipment, with test and commissioning reports
- Racks, power and cooling installed and labelled
- Network connectivity through AS218984
Buildings
Industrial buildings from bare ground to handover. We design, fabricate and erect pre-engineered steel buildings and carry out the civil and electrical work around them.
Capabilities
- Factory construction
- Warehouse construction
- PEB design
- PEB fabrication
- PEB painting
- PEB erection
- Pipe rack fabrication
- Civil maintenance
- Electrical maintenance
Typical deliverables
- General arrangement, fabrication and erection drawings
- Fabricated and painted primary and secondary steel, delivered to site
- Erected structure with roof and wall cladding
- Foundations, plinth, flooring and associated civil works
- Planned and breakdown maintenance for civil and electrical systems
Clip Lock Sheeting
Concealed-fix clip lock roof sheeting for factories, warehouses and other large roofs, on new structures and over existing roofs.
Capabilities
- Clip lock roof sheeting installation
- Long-run sheets for large industrial roofs
- Roof insulation laid beneath the sheeting
- Re-roofing over existing sheeting on new sub-framing
- Translucent skylight sheets in the same profile
- Ridge, flashing and ventilator detailing
Typical deliverables
- Sub-framing and clips fixed and aligned
- Insulation and sheeting installed across the full roof run
- A completed, weather-tight roof handed over
How a clip lock roof goes on, step by step
Clip lock sheets are held down by hidden clips instead of screws through the sheet. These photos from our sites follow one roof from frame to finish.
-
Purlins and sub-framing go in first
On a new building the sheets sit on the steel purlins. When we re-roof an old building, galvanised sub-framing is fixed over the existing sheets, so the factory below can keep working. Everything is lined up and levelled, because the finished roof will follow it exactly.
-
Insulation is rolled out
A glass-wool blanket is laid over the purlins, on safety mesh, one sheet-width ahead of the roofing crew. It keeps heat and rain noise out of the building, and stays dry because it is covered the same day.
-
Concealed clips are screwed to every purlin
Small steel clips are fixed to each purlin on the line of every sheet rib. These clips are the only fixings in the roof: no screw goes through the sheet itself.
-
Long sheets snap onto the clips
Each sheet runs in one length from the eaves to the ridge, so there are no end laps to leak. It is placed over the clips and pressed down until its ribs click into place. The next sheet overlaps the last rib and locks onto the same clips, which holds both sheets together.
-
Skylights lock in the same way
Where the building needs daylight, translucent sheets in the same profile replace a metal sheet and lock onto the same clips. Light comes in without a single extra hole in the roof.
-
Ridge, flashings and openings are sealed
Ridge cappings, edge flashings and ventilator openings are fitted and sealed last. Every roofer works in a full-body harness clipped to a lifeline.
-
A smooth, weather-tight roof
The result is a continuous metal roof with no exposed screws. Because the sheets are held by clips rather than bolted through, they can expand and contract with the heat without tearing fixing holes, which is what makes clip lock roofs last.
Pipe Rack Fabrication
Structural steel pipe racks that carry process pipes and cable trays across industrial plants, fabricated and erected by our own crews.
Capabilities
- Fabrication of columns, beams and cross-members
- Bracing for long, multi-bay rack runs
- Surface preparation and primer painting
- Erection on prepared foundations
- Supports for pipes and cable trays
- Alignment, levelling and bolting checks
Typical deliverables
- Fabrication drawings and cutting lists
- Primed steel members delivered to site
- Erected, braced and aligned pipe rack ready for piping
Railways
Signalling, telecom, electrification and construction work on live railway corridors, with a track record of timely execution, quality and sustainable solutions.
Capabilities
- Station and line revamp
- Signalling and telecom (S&T)
- Electrification
- OFC laying, testing and commissioning for railways
- Cable hut shifting
- PA system installation and commissioning
- Telecom cable maintenance
- Other construction and development in railway premises
Typical deliverables
- Signals, location boxes and cabling installed to approved plans
- Relay huts and equipment rooms built and fitted out
- Fibre and telecom cable routes with test records
- Station public address systems commissioned
- As-built documents for railway handover
Roadways
Road works and the buildings that serve a highway, delivered as part of expressway and national highway packages.
Capabilities
- Expressway works
- Toll plaza buildings
- Road works
Typical deliverables
- Toll plaza canopy and building structures
- Civil works for toll booths, lanes and plaza facilities
- Road work sections completed to the package specification
Solar plants
Engineering, procurement and construction of solar power plants, and the upkeep that keeps them generating.
Capabilities
- Solar EPC
- Rooftop plants
- Ground-mount plants
- Operation and maintenance (O&M)
Typical deliverables
- Site survey and plant layout
- Module mounting structures, modules, inverters and cabling installed
- Testing, commissioning and handover documents
- Scheduled cleaning, inspection and maintenance reports
Fleet & Manpower
AR Solution owns its own fleet of construction and project equipment and employs a large in-house workforce. That reduces dependency on third-party hire and supports faster mobilisation across sites.
Capabilities
- Company-owned fleet of construction and project equipment
- Scaffolding systems built from reinforced aluminium
- In-house skilled workforce
- In-house semi-skilled workforce
- Crews and equipment available for mobilisation across project sites
What this means for your project
- Less waiting on third-party equipment hire
- Faster start once a site is released
- One team accountable for people, plant and programme
Have a scope ready?
Share drawings, a bill of quantities or a tender reference and we will prepare a quotation.